chariot cool head seal placement

[killer454]

HELLO EVERYBODY I BOUGHT A USED CHARIOT COOL HEAD OFF EBAY WITH 22CC DOMES AND A NEW SEAL KIT.

THIS IS THE 1PC BODY

 

I HAVE 2-SEALS THAT FIT PERFECT AROUND THE OUTSIDE OF CYLINDER SEAL 2 BIG SEALS

I HAVE 2-SEALS THAT GO ON THE BOTTOM OF THE DOMES THEY FIT PERFECT

I HAVE 2-SEALS THAT GO INSIDE THE HEAD WITH DOMES OUT THEY SEAL THE INSIDE OF THE HEAD BY THE SPARKPLUG

 

IS THAT IT I HAVE GROVES ON THE DOMES THE REST OF THE SEALS ARE TO SMALL TO FIT ANYWHERE ON THE DOMES

 

SEALS I HAVE LEFT

1-VERY LARGE ONE MUST BE FOR A DIFFERENT HEAD

3-THE SIZE OF A QUARTER

1-A LITTLE SMALLER THAN A QUARTER

11-THAT LOOK TO BE FOR SEALING BOLTS NOT SURE

 

IM PUTTING ANY INFO YOU NEED TO HELP ME OUT

 

FROM LOOKING AT THE DOMES IT DOES NOT APPEAR THEY HAD A SEAL IN ANY OF THE SLOTS IN THE SIDE-JUST THE 1 SEAL INSIDE THE HEAD WHERE THE PLUG IS

THANKS FOR THE HELP EVERYBODY

[KaN Powersports]

The little ones and very large ones are for a head that has a removable top shell, then the little ones do go on all of the studs, and the very big one is for the perimeter of the shell. As for the 3, a lot of heads have one in the water inlet fitting ( back side of the head) if the fitting bolts to the head. If the shell is removable, there are usually ones on the underside of the shell at the domes as well.... Hope this gave some insight