BANSHEEBEEFM2M Posted October 7, 2013 Report Posted October 7, 2013 I rode the bike before i took the engine out and it ran good, I heard that you have to have porting for the 4 mill to work right is that true? How much would it cost to have the cylinders ported to match up? how can i tell if the stock head has been modded? how can i tell if its a long rod or regular rod? Quote
sheerider11 Posted October 7, 2013 Report Posted October 7, 2013 Wtf?! You've been here for like 3 months and your asking these questions? Call a sponsor here, send them your shit. Yes it's a must for absolute top performance. The rest is out of your qualifications so no matter what, send everything to a builder Quote
BANSHEEBEEFM2M Posted October 7, 2013 Author Report Posted October 7, 2013 do i need to send the whole motor or Just jugs???? Quote
n2otoofast4u Posted October 7, 2013 Report Posted October 7, 2013 Send the entire motor. You will end up with a setup that works the first time, no guess work by you or the builder. Quote
BANSHEEBEEFM2M Posted October 7, 2013 Author Report Posted October 7, 2013 who is reputable with fair prices and good turn around times? can i have the stock head modded for the 4 mill also? pistons only got ten hours what price range would i be looking at? 1 Quote
special06shee Posted October 7, 2013 Report Posted October 7, 2013 All the site sponsors are reputable! Call them ALL up, speak to each one and pick whoever you "connect" with the best. All will give a great product. 1 Quote
sheerider11 Posted October 7, 2013 Report Posted October 7, 2013 who is reputable with fair prices and good turn around times? can i have the stock head modded for the 4 mill also? pistons only got ten hours what price range would i be looking at?pistons are a toss up. They might work, might not. That's why you send the whole thing. No guess work Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.