hercalmighty Posted September 14, 2013 Report Posted September 14, 2013 Can someone please shed some light on what's going on. I have gas pouring out of my bowl overflows. It seems to only happen when I have the throttle around 1/8-1/4. At idle and 1/2 throttle or above it doesn't do it. I have 39 PWKs and I set the floats at 16mm. Does anyone have any ideas as to why this is happening? .m tfloa Quote
J-Madd Posted September 15, 2013 Report Posted September 15, 2013 I like to set the floats by blowing through the fuel inlet and moving the float until it cuts off when the float is about level with carb. Quote
n2otoofast4u Posted September 15, 2013 Report Posted September 15, 2013 Can someone please shed some light on what's going on. I have gas pouring out of my bowl overflows. It seems to only happen when I have the throttle around 1/8-1/4. At idle and 1/2 throttle or above it doesn't do it. I have 39 PWKs and I set the floats at 16mm. Does anyone have any ideas as to why this is happening? .m tfloa Pump or gravity? Quote
hercalmighty Posted September 16, 2013 Author Report Posted September 16, 2013 Does anyone have any ideas? Quote
J-Madd Posted September 17, 2013 Report Posted September 17, 2013 It has to be the float level or trash in the float seat. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.