Mikuni 34 tms

[sstaton1983]

I just picked up a 421 cub with 34 mikuni Tms carbs.I need new needles so while it was apart i checked the dump tubes.it has the Q2 .... i have read that i need a q0. I'm not real familiar with mikunies. Just wanting to see what's working for others with this carb. I'm running CPI in frames.

[Finch]

id call Brandon at wildcard hes a pro with the tms

[sstaton1983]

Anybody run the q2 emulsion tubes?

[dirtydownunder]

i ran the q2's   but now run the q0's.

 

midrange is better with the q0's

 

stock needle is  5FP17 

[fastbanshee8]

Mine were pig rich with the Q2's, so I bought the Q0's, and it runs great now.

[Wildcardracing]

Have you tried the bike yet? You will most likely want the Q0 tubes, but depending on your elevation and the cylinder you may get it right with the Q2's. If it has the original 5FP17 needles that is. Other needles will affect the midrange delivery. If you have the 5FP17's in there run them on the second leanest clip position with the Q-2's to start with. You may end up dropping the needle all of the way. PM me or give me a call if you need any advice.

-Brandon

[sstaton1983]

Thanks for the info. It does have the 5fp17 needles. I'm going to try it with a good needle and see how it runs before switching to the q0 tubes. I thing I'm around 800 ft here in oklahoma.

[Wildcardracing]

At that elevation, as long as the cylinder hasn't been chopped up so far to loose intake velocity you should be able to jet it with the Q2's. If you have any questions feel free to call.

-Brandon

(435)623-0148