ben-driscoll Posted May 31, 2013 Report Posted May 31, 2013 what so you guys think someone should be running for sproket size if you had a 2-5 trans running a 300 ft strip with a 365 drag ported with override trans. Quote
rg97 Posted May 31, 2013 Report Posted May 31, 2013 depends if you want accel or top speed. for 300ft drags, i'd go with 15 front or maybe a 16 (for more speed, less torque) and 39 or 40 rear Quote
possum Posted May 31, 2013 Report Posted May 31, 2013 tire rollout, rider weight, swingarm and fuel play a role. Quote
ben-driscoll Posted June 1, 2013 Author Report Posted June 1, 2013 22" tire, 190 lb rider, stock legth swinger, and running 93 and 110 mixed together gas, motor is runing at 150 psi compression Quote
m671054 Posted June 1, 2013 Report Posted June 1, 2013 Dirt,sand,asphalt? whats traction like? what you got now? Quote
m671054 Posted June 1, 2013 Report Posted June 1, 2013 If your anticipating wheel spin try 16-41 Quote
ben-driscoll Posted June 2, 2013 Author Report Posted June 2, 2013 right now im running 13-41 and it runs good but i think im starting to run outta gear Quote
04_blu_shee Posted June 2, 2013 Report Posted June 2, 2013 13-41 that would be gearing for Motocross...with your motor and rider weight you could easily run 15-40 gear...put a swinger on that Bitch with some aggressive paddles and let it eat Quote
ben-driscoll Posted June 4, 2013 Author Report Posted June 4, 2013 i got a stock length swinger with a aluminum axle but running a good wheelie bar Quote
possum Posted June 4, 2013 Report Posted June 4, 2013 well what gearing have you tried. And what happen? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.