H300F Posted October 30, 2003 Report Posted October 30, 2003 I would like to take an inch off of my stock swingarm. Before I go cutting can someone explain to me or show me pictures of where I will be cutting the swingarm and how to do it? If possibly the quicker the better I would like to do this tonight or tomorrow. thanks Quote
BenBB Posted October 30, 2003 Report Posted October 30, 2003 Try searching in the Tips & Tricks forum, mrmatt posted alot of great info & pics on his jig to shorten/extend a swingarm...hopefully it survived the transition... Quote
txblueshee Posted October 30, 2003 Report Posted October 30, 2003 I don't think those topics made it through the upgrade , there was AAALLLLLOOOTT of great info in them. PM mrmatt and see if he has some of that info saved in pm's or his computer. Mike Quote
mrmatt Posted October 31, 2003 Report Posted October 31, 2003 I wasn't able to find the old post, but I still have all of the pictures and the write-up. Send me an email at [email protected] and I'll send the stuff to you. Note that you should set aside about 10-12 hours to do this project. It still takes me about 6 hours and I already have the jig and have plenty of practise. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.