tdod101 Posted April 12, 2013 Report Posted April 12, 2013 Holy crap guys, so I got my shee out of the shop started up sounded good ran it for a bit than brought it home, 2 days later it won't start. So I took the liberty to do DIY this time, took the 26mm carbs off and low and be hold they were dirty as hell, gasket wasn't even replaced and the jetting was horrible. First off, there was just a regular old bolt screw where the pilot jet should be, secondly the air mixture screw was all the way in, third the slides were covered in black crap, and fourth all the bowl screws were stripped! What a nightmare!!! I need some help with this guys, just jetting and air screw basically, I can do the rest. 87 banshee pretty much stock except for good series pipes and fmf silencers Quote
SAVAGE420 Posted April 12, 2013 Report Posted April 12, 2013 Should have got the great series pipes instead. What did you even take it in for in the first place? Quote
SAVAGE420 Posted April 12, 2013 Report Posted April 12, 2013 I know, I was just Fuckin with ya. Sausage fingers and auto correct on your phone I see. Quote
sheerider11 Posted April 12, 2013 Report Posted April 12, 2013 Should have loaded it up and parked in the shop. Asked the guy wtf he did. Quote
tdod101 Posted April 12, 2013 Author Report Posted April 12, 2013 I'm trying to upload pictures but the 50k limit sucks, anyways the slides are black the carbs are brown and green with varnish the top of the slides where the cable sits had gunk in it. And I finally tore apart that TORS system (fuck you!) that was a pain in my ass. Quote
Larry's Shee Posted April 12, 2013 Report Posted April 12, 2013 You only paifor a tune up, not carb clean Quote
tdod101 Posted April 12, 2013 Author Report Posted April 12, 2013 Well like the saying goes, if you want something done right do it your self! next on the agenda is the TORS delete kit k&n filter pods and vforce 4 reeds. Hopefully somewhere I can find a cheap set of toomey 5's Quote
Jereme6655 Posted April 12, 2013 Report Posted April 12, 2013 the black stuff that is on your slides is a stain from the slides going up and down in your carb bore. Unless you have something else going on....that black is nothing going on. Quote
tdod101 Posted April 12, 2013 Author Report Posted April 12, 2013 the black stuff that is on your slides is a stain from the slides going up and down in your carb bore. Unless you have something else going on....that black is nothing going on. Okay, they're still getting cleane though, all sorts of crap in the actual carb Quote
notsed Posted April 13, 2013 Report Posted April 13, 2013 i have some jets and i set of stock carbs with tors removed, if you live close enought to windsor ill help you get it running right if you want, lmk Quote
tdod101 Posted April 13, 2013 Author Report Posted April 13, 2013 i have some jets and i set of stock carbs with tors removed, if you live close enought to windsor ill help you get it running right if you want, lmk Well I'm in Richmond Hill north of Toronto. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.