bansheeboie Posted April 10, 2013 Report Posted April 10, 2013 Hey fellas got a polished 535 cheetah top end(complete) Cylinders ported by WK racing. Comes with reeds,39mm intakes,pistons,base gasket,domes,head, and all hardware-1000shipped 10mil crank works crank(115mm rod) Has max load and tz bearing. Great shape maybe 20hrs on it if that-650shipped Brand new Hinson basket with cushions-140shipped I'll get pics of everything later tonight Quote
shustack Posted April 10, 2013 Report Posted April 10, 2013 570-985-7059. Text asap on everything!! Quote
bansheeboie Posted April 11, 2013 Author Report Posted April 11, 2013 Also have a set of 39pwks Quote
Trapshooter Posted April 11, 2013 Report Posted April 11, 2013 I'm interesting the 39pwks. How much ? Quote
bansheeboie Posted April 11, 2013 Author Report Posted April 11, 2013 325shipped on the 39pwk's Quote
bansheeboie Posted April 11, 2013 Author Report Posted April 11, 2013 1. Oem basket(tight),pressure plate,hub(not pictured),oem springs,pusher-65shipped 2. Oem stator from a 99-75shipped 3.brand new Hinson billet basket & cushions-140shipped 4. Set of 39pws's (gas)-325shipped 5.oem clutch cover(complete) with water pump & cover,insert,dipstick,hardware-40shipped 6.complete stock trans(complete) drum,forks,gears,shaft,spring,boss,etc..-110shipped 7.polished/ported WK racing 535 cheetah topend(head,cylinders,domes,upp intakes,reeds,pistons,.031 base gasket,block off plates,hardware, & cases bored&ported to the 535 cylinders-1400shipped Quote
bansheeboie Posted April 11, 2013 Author Report Posted April 11, 2013 Crank works 10mil crank with maxload & tz bearing. Also trued & welded. Has 20hrs if that on it. 115mm rods-650shipped Quote
under cover Posted April 11, 2013 Report Posted April 11, 2013 Do the cylinders have sleeves in them or is it the pic's that make them look like they do? Quote
bansheeboie Posted April 11, 2013 Author Report Posted April 11, 2013 Cylinders are ready to run! It's just the pics that make it look that way brotha Quote
crazycracker520 Posted April 11, 2013 Report Posted April 11, 2013 It really looks like an iron sleeve in those cylinders to me!! crazycracker Quote
ticktock Posted April 11, 2013 Report Posted April 11, 2013 Bansheeboi is pretty upstanding here. If he says its not it prolly isn't. Quote
BANSHEE HP Posted April 11, 2013 Report Posted April 11, 2013 It really looks like an iron sleeve in those cylinders to me!! crazycracker after actually looking at the pics on my computer instead of the phone, those do appear to have steel sleeves... could be the pics still but see if a magnet sticks to the cylinder walls. Quote
n2otoofast4u Posted April 11, 2013 Report Posted April 11, 2013 Cylinders are ready to run! It's just the pics that make it look that way brotha Are you sure? Would you know the difference? Put a magnet in them! Every picture shows a line! Quote
bansheeboie Posted April 11, 2013 Author Report Posted April 11, 2013 i just pulled a magnet off the fridge to see if it wud stick to the inside wall of the cylinder and it didn't. I bought these from a member who had got them from another very reputable member on here. so I know there should not b any problems with em at all. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.