gordo_dk Posted April 6, 2013 Report Posted April 6, 2013 I have a set of 34 pjs...and the right side carb is leaking lots of fuel...nvr had this problem before...my friend told me the float is getting stuck, anybody know what can this be and how I can fix it? Quote
trickedcarbine Posted April 7, 2013 Report Posted April 7, 2013 Floats don't really stick much on the keihin carbs. But they do tend to come out of adjustment. There is that little silver tab that sits in the wire loop on the needle and seat. You can bend it to get the float height set back where it should be. Quote
trickedcarbine Posted April 7, 2013 Report Posted April 7, 2013 Yeah, just not needed. If you would rather just have new parts instead of trying to fiddle with yours, order a new float from Sudco or Marshall. Quote
gordo_dk Posted April 7, 2013 Author Report Posted April 7, 2013 I'm new to these carbs hat why I ask, can you show a step by step process of how to do it? Quote
trickedcarbine Posted April 7, 2013 Report Posted April 7, 2013 I'm not around the quad today, so no photos of it. I think if you go to Sudco's website. They have a diagram of the floats and an image of how to measure the height properly. One other possibility, that brass tube in the float bowl. It could be bent forward to much and running fuel out but make sure To check the floats first. Quote
gordo_dk Posted April 7, 2013 Author Report Posted April 7, 2013 Ok thanks alot...will look into today Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.