apeik Posted April 3, 2013 Report Share Posted April 3, 2013 Cylinders are Dune Ported by Herr Juggs racing. Noss coolhead with 21 CC domes for running pump gas. Hot Rods stock stroke long rod(115mm) crank, that was also trued and welded by HJR, Wiseco 795 series pistons that are made for the long rod setup. Cylinders were bored to 64.50 with new pistons and the crank was welded. Top end has 32 hours on it from fresh, you can still see crosshatch in the cylinders, however there is one vertical scratch that is very small above exhaust port that you can barely snag with a nail, it never effected compression or how it ran. This motor ran awesome and was right at 130 psi in both cylinders when torn down. Comes with everything in the picture(no coolhead orings or nuts). $700 shipped. for more info or more pics text 858-848-4621 -Aaron Quote Link to comment Share on other sites More sharing options...
chevybanshee91 Posted April 3, 2013 Report Share Posted April 3, 2013 Pm sent Quote Link to comment Share on other sites More sharing options...
apeik Posted April 3, 2013 Author Report Share Posted April 3, 2013 pm returned, coolhead sold. $600 for cylinders/pistons/crank Quote Link to comment Share on other sites More sharing options...
apeik Posted April 4, 2013 Author Report Share Posted April 4, 2013 580 shipped with gifted paypal, you wont be dissapointed with how these cylinders run. Quote Link to comment Share on other sites More sharing options...
apeik Posted April 4, 2013 Author Report Share Posted April 4, 2013 for the cylinders/pistons/crank that is, coolhead sold and shipped yesterday. Quote Link to comment Share on other sites More sharing options...
apeik Posted April 4, 2013 Author Report Share Posted April 4, 2013 also have a shaved stock head i can throw in with this setup. Quote Link to comment Share on other sites More sharing options...
apeik Posted April 5, 2013 Author Report Share Posted April 5, 2013 $580 shipped everything in the pic. (head is shaved). Quote Link to comment Share on other sites More sharing options...
apeik Posted April 7, 2013 Author Report Share Posted April 7, 2013 Ttt Quote Link to comment Share on other sites More sharing options...
Evansouders Posted April 8, 2013 Report Share Posted April 8, 2013 how much for the top end with out the crank? plz txt 5038881332 and send a pic of the scare in the top end thanks Quote Link to comment Share on other sites More sharing options...
mitchdog Posted April 9, 2013 Report Share Posted April 9, 2013 How much for cylinders Quote Link to comment Share on other sites More sharing options...
Dtodaro Posted April 10, 2013 Report Share Posted April 10, 2013 Styll have the the cylinders,crank,and piston? Quote Link to comment Share on other sites More sharing options...
apeik Posted April 10, 2013 Author Report Share Posted April 10, 2013 This setup is SOLD. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.