01BANSHEE20 Posted March 30, 2013 Report Posted March 30, 2013 I got a different stator for my 99 banshee it was of an 06 banshee tied all the wires together. Now it won't start but it has spark. I pull the plugs out and the have good bright blue spark kicking it over NOT FAST AT ALL. then I kick it fast and it craps out and won't spark at higher speed. And when I go to start it it won't at all and when I kick it slow it kicks back and back fires occasionally. Need opinions tried new wiring harness different cdi and different coil. Help!! Quote
Surfrjag Posted March 30, 2013 Report Posted March 30, 2013 is the tors still hooked up? did you ohm stator? Quote
01BANSHEE20 Posted March 30, 2013 Author Report Posted March 30, 2013 Tors isn't hooked up. I ohm stator and they all made a circuit ohms were off a bit but didnt think that would be the problem Quote
Surfrjag Posted March 30, 2013 Report Posted March 30, 2013 is it oem? what reading did you get? Quote
01BANSHEE20 Posted March 30, 2013 Author Report Posted March 30, 2013 I can't remember. One was 110 one was 13.7 one was like .7 Quote
Juss11 Posted March 30, 2013 Report Posted March 30, 2013 Did u set the gap on the pick up coil? Quote
toytech Posted March 30, 2013 Report Posted March 30, 2013 Did u set the gap on the pick up coil? +1 sounds like the gap for pick up coil is to large. Quote
01BANSHEE20 Posted March 30, 2013 Author Report Posted March 30, 2013 Yeah it's the width of a business card. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.