little too much

[Scooter350]

My jettings a lil much running a pwk 39mm 210main 45 pilot 2into1 trinity with pod dune port 21cc coolhead domes fmf sst cf reeds 700' elevation what should I jet it down to?

[Scooter350]

And .30 over if that helps

[sheerider11]

200? I'm not sure on single carbs, but is a 45 pilot normal? That seems low. I have a 50 on dual 35's. I would think it has to be more the what I have since it has 2 cylinders to feed

[Scooter350]

2003 its also in the middle notch on the needle, thought it was a little off but just wanted a couple of opinions. Low-end is way rich, and fouled my stator side plug so need to order a few different sets to get me in the ballpark, thanks for the info if you have anymore suggestions definitely let me know

[BeeCanBanshee]

I ran a 190 main and 48 pilot on a single 33

[BeeCanBanshee]

Maybe try a 200 main and 50 opt 52 pilot . I am at 88ft elevation

[Scooter350]

Just ordered a assortment of different sizes in that range ill try em all till I like it thanks for the info

[trickedcarbine]

Zilla is in the ball park. Try something like a 50-55 pilot, EEK or EEJ needle, and a 170-175 main

[Scooter350]

Thinking about moving the needle position, I'm a lot closer but still a little hesitant when I floor it wot bout 3rd gear then I feather the throttle back and catch up on powerband. I'm running the 170/55 middle position needle clip right now.