4strokekiller12 Posted February 21, 2013 Report Posted February 21, 2013 what is best way to lighten hubs Quote
fappy'97 Posted February 21, 2013 Report Posted February 21, 2013 Send them to Wheelman if you can get ahold of them. He does it for a good price... Quote
4strokekiller12 Posted February 21, 2013 Author Report Posted February 21, 2013 have 4 rather learn to do them my self Quote
springer Posted February 21, 2013 Report Posted February 21, 2013 lathe.... you could sorta do it by hand with a die grinder and some burrs, but it would suck. and take forever. Quote
Rustynail Posted February 21, 2013 Report Posted February 21, 2013 jack up the rear of the banshee take of wheels. Fire up banshee and have a friend hold throttle to a good RPM....with hubs still on axle you have them spinning like on a lathe...just keep out of the chain....OH and update with pics of you doing this! Quote
dbalpine Posted February 22, 2013 Report Posted February 22, 2013 Last I check the motor didn't spin the front wheels on my banshee Quote
Surfrjag Posted February 22, 2013 Report Posted February 22, 2013 how much weight is taken off when you lighten them? Quote
4strokekiller12 Posted February 22, 2013 Author Report Posted February 22, 2013 is it that beneficial I had a se t done then they started being shity Quote
4strokekiller12 Posted February 22, 2013 Author Report Posted February 22, 2013 sorry out of surgey still confused the benefit is less rotating mass Quote
Dmx Posted February 22, 2013 Report Posted February 22, 2013 I just milled my front hubs, only 4 slots/hub and the weight loss was about 50grams per hub. There is more to shave off of them if youre going to only drag. Heres my stock vs milled hubs Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.