foxrider603 Posted February 18, 2013 Report Posted February 18, 2013 My banshee is getting rebuilt and this is first banshee I got it with a blown top end what is the break in procedure , ive owned 2 strokes before but never one that had to do a break in period Quote
sheerider11 Posted February 19, 2013 Report Posted February 19, 2013 Put it together start it, listen for anything odd. Put around, check all the nuts and bolts, go rip. Some one is going to tell you heat cycles, and 10 min, 15 min, 1/4 throttle, 1/2 throttle. The guy that ported my 4 mil well known sponsor, told me the way I told you. My top end is still good 1 year later Quote
2strokes4u Posted February 19, 2013 Report Posted February 19, 2013 yeah, my builder did the same thing. Started it and cruised around to listen to it. Then we went out and ripped it. no problems so far. Quote
Finch Posted February 19, 2013 Report Posted February 19, 2013 make sure to put in the red powerband!but im with the masses starting it let it get warm shut it off make sure everything still tight and rip it! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.