Jump to content

Recommended Posts

Posted

I have a 89 banshee, tore down the motor at the end of season last year and built up a 421 serval. Put the bike back together, couldn't get a spark. Bought a new cdi, new ignition/coils, new stator, and another harness. Still no spark. I can't figure it out. Any suggestion will be greatly appreciated.

Posted

X0303043 on the key for sure. I was looking around like a mad man when I couldn't get any spark with my banshee the other day. It was a wire under the little boot of the key tumbler, soldered it back on... came over on the first kick.

Posted

Well I went through everything again, checked all grounds everything seems fine, just waiting on the new on/off/headlight switch. I also forgot to mention the on/off key switch was removed by previous owner and soldered together.

  • 2 weeks later...
Posted

Well guys I got exhausted replacing parts and tired of countless hours of trying to make what I had work. Took the motor out, threw it in spare frame, spliced the stator into the harness (different plugs), and boom! SPARK!!!!!!! So I guess my harness was bad and the spare harness was bad. Should have the shee up and running tomorrow. Again thanks to everyone for there advice. Cheers

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...