throttle cable and carb help

[highcomp26]

Can this throttle cable fit this carb? Am I doing something wrong or got the wrong cable. This carb has threads on top and this cable don't thread in the top of this carb.

 

 

 

[highcomp26]

Help me out guy I was trying install these cables to put on these carbs, do I need to drill out the top of this carb so that rod can go in cause with that cable install the carb slide is almost half way open

[Starwriter]

Those are the nastiest carbs I have ever seen!

 

You're missing these.

 

[highcomp26]

Bro trust me and I cleaned the hell out of them. I don't know what to use any more. Where can I get that part

[highcomp26]

If the cable cannot fit in the hole how is that going to work?

[Starwriter]

The cable adjuster screws into the carb top. Slide the cable through the adjuster till the cable housing seats into the hex shaped part of the adjuster. Slide the rubber boot down the cable and over the adjuster. Attach the spring, slide, and keeper to the end of the cable. It's not rocket science when you have all the parts.

 

Post in the wanted section and if you've been good this year, Santa might ship you a pair of cable adjusters.

[highcomp26]

sorry but i needed to order cables from Tony Ducas Racing the stock was to short for 38mm

[Bird Eyes]

Missing those as well. What Are those called exactly so I can order some? And how do they stay on the cable? Is it like some kind of compression fitting?

Thanks,

Jason