blubyyou Posted October 23, 2012 Report Posted October 23, 2012 Well I just finished my build and it won't start. Long story short I removed my cut harness, cdi, coil, stator...was running just fine. Put on a new uncut harness, cdi, coil, and stator with all the plugs and wires....I wanted to run lights this time. It started up initially...then I welded on a couple of tabs for my xrf propeg nerf bars to mount to. Went to start it and it won't hit a lick. I think I messed up by welding with a mig and not unhooking any of the electrical stuff....I know, my stupidity. Next question is where do I start? Buy a new cdi, coil, and stator? Just want to get it running. Thanks. Quote
toytech Posted October 23, 2012 Report Posted October 23, 2012 welding shouldn't hurt the coil or stator. Quote
toytech Posted October 23, 2012 Report Posted October 23, 2012 I would do resistance checks on the coil and stator and rule them out first, don't just want to through parts at it. and if you just changed the harness check and clean grounds, and conections. Quote
hoppedupandcutdown Posted October 24, 2012 Report Posted October 24, 2012 X2^^ i've welded on many,never a problem. Maybe just lucky. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.