yamaha driver Posted October 15, 2012 Report Share Posted October 15, 2012 first of my mods are only fmf pipes with no airbox just open uni airfilter. so right now my plugs are about a tan color after just riding around. but it seems somewhat hard to start now since it got a little colder out side. it takes full choke and about 8 kicks at about 20-50 degrees. my jets now are 25 pilots and 250 main's and my needle is on the very lowest setting. i believe the needles are 5n7. and air screws are out 2 screws. Should i jet up? and if so where is a good place to buy needles and jets since one of my needles are bent at the tip Quote Link to comment Share on other sites More sharing options...
yamaha driver Posted October 16, 2012 Author Report Share Posted October 16, 2012 anyone know where i can pick some jets and needles up? Quote Link to comment Share on other sites More sharing options...
JayCLL Posted October 16, 2012 Report Share Posted October 16, 2012 anyone know where i can pick some jets and needles up? Jetsrus.com I've used in the past Quote Link to comment Share on other sites More sharing options...
2strokeBEAST Posted October 17, 2012 Report Share Posted October 17, 2012 Do you mean the tips of your plugs are tan, or a tan ring with the threads chopped off? And if you've been riding in the summer months in MN, then you'll definitely want to jet up for Winter. If you don't have it already, go and download the Banshee Digital Toolkit, http://www.4shared.com/dir/JGdLyFR1/Banshee_Digital_Toolkit.html and use the jetting calc. to help you get your jetting close. Quote Link to comment Share on other sites More sharing options...
yamaha driver Posted October 17, 2012 Author Report Share Posted October 17, 2012 Do you mean the tips of your plugs are tan, or a tan ring with the threads chopped off? And if you've been riding in the summer months in MN, then you'll definitely want to jet up for Winter. If you don't have it already, go and download the Banshee Digital Toolkit, http://www.4shared.com/dir/JGdLyFR1/Banshee_Digital_Toolkit.html and use the jetting calc. to help you get your jetting close. the tips were tan. i didnt have any new plugs for a chop. Quote Link to comment Share on other sites More sharing options...
YelaBanshee Posted November 2, 2012 Report Share Posted November 2, 2012 When I run mine in the winter I always make sure to jet up it helps a lot in the long run especially with how MN winters get Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.