yamaha driver Posted October 13, 2012 Report Posted October 13, 2012 so i bought some moose carb kits for my banshee but now when it just warms up and i hit the gas it will bog a little and sometimes backfire. It has the choke tube hooked up. the jets are 250 main 25 pilot jets are 25. screw is out 2 with needles on middle clip. im about sea level. any ideas anyone Quote
hoppedupandcutdown Posted October 15, 2012 Report Posted October 15, 2012 Are the slides and bowls on the proper carbs? Quote
yamaha driver Posted October 15, 2012 Author Report Posted October 15, 2012 (edited) Are the slides and bowls on the proper carbs? yea i took one carb off at a time. i found out one of the throttle needles are bent though but its on the opposite side that it was backfiring from. should i just install some bigger jets and get the same type of needles? and if so what sizes should i go 2 Edited October 15, 2012 by yamaha driver Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.