SAVAGE420 Posted September 2, 2012 Report Posted September 2, 2012 Bushings, bearings. GREASE THEM ALL!!! Quote
jsinar Posted September 2, 2012 Report Posted September 2, 2012 Mine's doing the same, but not as bad, I greased all the fittings I could find, and got under the edge of the ball joint boot with a needle fitting, It helped, but it still squeaks some. Quote
dunesovertrails Posted September 3, 2012 Author Report Posted September 3, 2012 Alright thanks guys. Quote
spurdy Posted September 3, 2012 Report Posted September 3, 2012 Use more KY. Friction sucks! SP Quote
jsinar Posted September 7, 2012 Report Posted September 7, 2012 Update... I went to get on mine today and it was as bad as the OP... Found the source. Pull the bottom bolts out of your shock mounts, clean the metal tubes good and slather with some grease. I always use the green Lucas grease since its waterproof. The only thing you can hear now is the shocks working. Quote
mike0chek Posted September 7, 2012 Report Posted September 7, 2012 Update... I went to get on mine today and it was as bad as the OP... Found the source. Pull the bottom bolts out of your shock mounts, clean the metal tubes good and slather with some grease. I always use the green Lucas grease since its waterproof. The only thing you can hear now is the shocks working. ive got the same noise in the same spot, maybe ill clean it up this weekend Quote
spurdy Posted September 8, 2012 Report Posted September 8, 2012 I wouldn't use grease, it will hold dirt, sand, debris etc. Grease doesn't provide adequate lubrication if it is full of grit. Try something that isn't sticky like graphite. Just my 2 cents. SP Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.