535 cheetah part out

[Asnaper]

All prices are plus shipping. I'm in harrisonville Missouri my cell is 816 738-1455 you can call or text. If using PayPal buyer pays fees or send as gift

I'm doing this from my phone so I apologize if pics get out of order

Thanks

 

First is cylinders and head. 72.5 mm bore power valves and bores are great and ready to run. Stock porting no damage 1 dome has a very small nick in it hard to see in pics but wanted to note it. Shouldn't affect anything $900

 

Second 10 mil hot rods trued and welded crank. Only ran 2 weekends total at little Sahara ready to run no issues at all. Asking 450

 

Third is the cases from above cylinders and crank. No chain wack port matched to cylinder above there is some scaring in bottom of left side cylinder from a reed coming apart but causes no issues crank clears fine and bearing surfaces are fine. Asking 200

 

I will make a package deal on everything for 1400

 

going to have to upload pics as replays since I'm doing it from my phone. Will take me a few minutes

[Asnaper]

Guys I'm getting a error message says file not found when trying to upload pics any suggestions? Computer is broke so I gotta do it from my phone

[Infamous039]

Upload your pictures to photobucket then Copy and Past the IMG code and your pics will show.

[bansheeboie]

How did this setup run with stock porting? Alky?

[Asnaper]

How did this setup run with stock porting? Alky?

 

It ran really well on gas c12 I was happy with the torque it made with Bb in frame shearers it actually isn't as pipe as u would think. It was never timed on a track or on a dyno but guys with similar set ups were making around 110-115hp on gas.

 

And I'll go to a buddies after work to try the pic thing again. I'm just putting my 421 back in it

[#1JUANstunna]

Here is all the pics for Asnaper

 

 

 

 

 

 

 

 

 

[kessig4x4]

Send PM on cases and crank very onterested/serious... Send me some pictures if you can on here or [email protected]

Thanks man,

Kyle

[kessig4x4]

Send PM on cases and crank very onterested/serious... Send me some pictures if you can on here or [email protected]

Thanks man,

Kyle

 

Nevermind on pictures, you just had a few posted

 

Oh , and I dropped my phone in the bay 2 days ago I can call later though

Thanks

Edited August 27, 2012 by kessig4x4

[Asnaper]

Nevermind on pictures, you just had a few posted

 

Oh , and I dropped my phone in the bay 2 days ago I can call later though

Thanks

 

 

Sounds good I'll get more detailed pics of anything needed as well. I don't want any surprises for anyone.

[Asnaper]

Here is all the pics for Asnaper

 

 

 

 

 

 

 

 

 

 

 

 

Thanks a lot!!

[Asnaper]

Sale pending on crank and cases

[bansheeboie]

Lmk if it falls thru. I'm thinking bout goin 10mil and selling the cub

[Asnaper]

Lmk if it falls thru. I'm thinking bout goin 10mil and selling the cub

 

I will let ya know.

Thanks

[Asnaper]

Cases and crank sold.

[Asnaper]

700 shipped will buy the cylinders. May trade for a glock 27 or 30 if someone has one.