Juss11 Posted August 24, 2012 Report Share Posted August 24, 2012 When building a 4MM long rod, do you still have to have custom cut doms? Im going to be running the Wiseco 795 long rod pistons. My cyclinders have some mild port work, but do they have to be ported for the stroker kit? Quote Link to comment Share on other sites More sharing options...
Finch Posted August 24, 2012 Report Share Posted August 24, 2012 When building a 4MM long rod, do you still have to have custom cut doms? Im going to be running the Wiseco 795 long rod pistons. My cyclinders have some mild port work, but do they have to be ported for the stroker kit? you need to have your cyl ported for 4mill dont use spacer plate Quote Link to comment Share on other sites More sharing options...
Colby Posted August 24, 2012 Report Share Posted August 24, 2012 you need cylinders ported for 4 mil timing, 795 pistons are used for the 115mm rod, dont use a spacer plate, get domes custom cut for 4 mil Quote Link to comment Share on other sites More sharing options...
bansheeboie Posted August 24, 2012 Report Share Posted August 24, 2012 X2 on ev thing said above, if your Gona do it, do it right the first time so it will last! If you have the extra money for porting i wud go to hjr. He did my 4mil dune port setup and that thing ripped! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.