Jump to content

Recommended Posts

  • Replies 38
  • Created
  • Last Reply

Top Posters In This Topic

Posted

I was thinkin to make a temp guage. I havent done this but want to,

Instead of useing anything with the hose. I want to use the exsisting Drain holes

on the cylinder s, with some type of auto aoto/cycle temp gauge. Then if you wanted you could run dual gauges for each side temp. Im not sure if the dual guages would work like that with the coolant flo and all. But I does seem like it would work since

there directly located on the cylinder and 1/2 inch from the sleeve.

It was just an Idea

  • 1 month later...
Posted

Sorry I've been away,for any of you interested in the foam block I was talking about,heres some pics.The radiator shroud will pinch it and keep it in place.After a few months,the foam will take shape of the radiator.

Posted

Heres how it looks with the radiator cover on.It really helps to channel the incoming air through the radiator instead of around it.I guarratee anyone with cooling issues will notice a difference,especially at lower speeds where you need all of the incoming air to pass through the radiator.

Posted

I'm running a similar temperature gauge block like Deuce,but I opted for an automotive style gauge.Its going on two years and it still works good despite the vibration.

 

The only time the needle vibs a bit is just off idle.The plastic does a good job of quelling the vibration.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...