bansheeboi Posted July 20, 2012 Report Posted July 20, 2012 guys what wrong with this pic? notice wheel Quote
donkeypuncher Posted July 20, 2012 Report Posted July 20, 2012 Looks like your toe in is off. Adjust your tie rod out to point your tire in more. Edit: based off the location of the clutch and front brake lever it looks like your bars aren't straight. So I'd say your toe is fine and tie rods don't need adjustment. Frame looks straight to me, but then again I'm lookin at the pics from an iPhone.. Quote
SandmanPNW Posted July 20, 2012 Report Posted July 20, 2012 Rusty frame and a weight bench on what appears to be a trail? Quote
benjiman the builder Posted July 20, 2012 Report Posted July 20, 2012 (edited) is that frame supposed to be like this ???......................... Edited July 20, 2012 by benjiman the builder Quote
ginger Posted July 20, 2012 Report Posted July 20, 2012 yes, its the part further to the front that looks bent Quote
ClayAiken Posted July 20, 2012 Report Posted July 20, 2012 (edited) They make skid plates for a reason. Frame looks a little funkay but def needs the left(from pic) tie rod adjusted Edited July 20, 2012 by Asshair Quote
Starwriter Posted July 20, 2012 Report Posted July 20, 2012 If the handlebars are straight in that pic, it appears that you have more serious problems than just adjusting the toe in. There is already a lot of threads showing on the tie rod end of the suspect side. Isn't this the Banshee that doesn't sit level? You really need to spend some time with a tape measure. It would be nice to compare yours to a buddy's Banshee. Put them side by side and start making comparisons. Quote
jsinar Posted July 20, 2012 Report Posted July 20, 2012 Mines also got that little offset spot above the circle. Think it's how it's made Quote
Tommilicious Posted July 21, 2012 Report Posted July 21, 2012 Is this a guess and tell thread or are you asking what you need fixed? What are you waiting for? lol Quote
Bkm2006 Posted July 22, 2012 Report Posted July 22, 2012 buy a good used frame and have it powdercoated ... then switch all your stuff over to the new frame... plus your bike will look a lot better with new powder Quote
joey83 Posted July 22, 2012 Report Posted July 22, 2012 Frame looks bent.. but my wheels were doing that too and it was just loose stuff. check the 2 allen bolts the the steering arm that bolts on driver side or left side. I could turn my bars and it would only turn one wheel before the other side would finally start moving. BUT compared to mine your frame also looks hurt. Im going to sell my purple powder coated frame after riding season or trade it for a virgin factory frame i can pc any color besides purple... Im around tulsa ok if ur close enough and interested. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.