joey83 Posted July 18, 2012 Report Posted July 18, 2012 Picked up this Banshee from my cousin last weekend as a little project for me and the kiddo. I've had lots of 2 stroke dirt bikes but this is my first Banshee. Loooooove 2 strokes! Has a broken rod that busted the case. Picking up parts to get it back together so I can do some riding this summer. I plan on tearing it down this winter to doll it up. It's been neglected quite a bit. Lots of great looking bikes on here! good motivation for me. Quote
ClayAiken Posted July 18, 2012 Report Posted July 18, 2012 Picked up this Banshee from my cousin last weekend as a little project for me and the kiddo. I've had lots of 2 stroke dirt bikes but this is my first Banshee. Loooooove 2 strokes! Has a broken rod that busted the case. Picking up parts to get it back together so I can do some riding this summer. I plan on tearing it down this winter to doll it up. It's been neglected quite a bit. Lots of great looking bikes on here! good motivation for me. Welcome to the club man. Good luck with the rebuild as you go youll find these are so much easier to work on than dirt bikes. You should be able to come across a set of cases and a crank on here pretty cheap. Good luck with the build make sure to keep us updated. Quote
Jereme6655 Posted July 18, 2012 Report Posted July 18, 2012 Talk to a member named NYUK on here....he deals in used parts for extremely good deals. He can get you started with cranks and possibly a set of cases Quote
sheerider11 Posted July 18, 2012 Report Posted July 18, 2012 Talk to a member named NYUK on here....he deals in used parts for extremely good deals. He can get you started with cranks and possibly a set of cases X2 I'm lucky and live in Jersey so I stopped by. I felt like I robbed him. But buying a broke bike is the way to go. Quote
joey83 Posted July 19, 2012 Author Report Posted July 19, 2012 Thanks guys. I'll look him up. Funny that u mentioned that because my local deal on parts just fell through. Just bought a few things from 007banshee's quad too. I need to post up some pics of my crank and rod to get some opinions. It had a fresh rebuild and the left cylinder melted down pretty bad. The rod bearing was HURT and left some bearing/rod on the crank. The cylinder and piston look decent. ??? But the rod bearing area is blue from getting so hot. Looks like a recwnt rebuild too with good parts. a little concerned... Quote
joey83 Posted July 19, 2012 Author Report Posted July 19, 2012 Can I post pics and ask for opinions on this failure? I was wrong, I thought the cylinders and top end looked pretty decent but they're hurt. The story I got was the owner loaned it to a friend and the friend brought it back and said it died and wouldn't restart. I'm guessing he filled her up with staright fuel. ??? opinions? I hate to rebuild this engine and have it lean out and burn it up again. Is there any problem areas I need to double check or anyhting? Thanks a ton guys!! Quote
joey83 Posted July 19, 2012 Author Report Posted July 19, 2012 Some material got left behind on the crank. I was going to replace it when taking my bottom end out and transferring to new cases. ? Quote
joey83 Posted July 19, 2012 Author Report Posted July 19, 2012 Left side cylinder that had the broken rod. Quote
joey83 Posted July 19, 2012 Author Report Posted July 19, 2012 I originally thought the left side leaned out but the right cylinder is hurt bad too. Any opinions on any of this stuff would be greatly appreciated. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.