bball23 Posted May 31, 2012 Report Posted May 31, 2012 Just bought another drag banshee and it has no spark. I put the coil on my good banshee from it and the coil is good... What else should I check? What should the flywheel be at? Quote
Finch Posted May 31, 2012 Report Posted May 31, 2012 Just bought another drag banshee and it has no spark. I put the coil on my good banshee from it and the coil is good... What else should I check? What should the flywheel be at? think flywheel gap is around .18 i just use a buisness card check that and stator. if ya have a ohm tester Quote
MyNameIsMud Posted June 1, 2012 Report Posted June 1, 2012 I had this same issue a few weeks back and it ended up being my pick up coil. But id check the grounds and get a DVOM and check to see if your ignition is in spec. Quote
Finch Posted June 1, 2012 Report Posted June 1, 2012 You can test the pick up with a ohm meter too if ya don't have one get a clymers it will tell ya how to check all that Quote
mike0chek Posted June 1, 2012 Report Posted June 1, 2012 you for sure should get a tester and test the stator, i have had one die on me before Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.