lodgeb Posted May 6, 2012 Report Share Posted May 6, 2012 My banshee misses bad after it heats up. I can ride for a good 10 minutes or so and everything works perfect but then it misses bad past half throttle. I have already swapped the cdi box and coil. I really have no idea what else to do. Any help would be greatly appreciated Quote Link to comment Share on other sites More sharing options...
Phelps Posted May 6, 2012 Report Share Posted May 6, 2012 check grounds, make sure the stator housing doesn't have water in it, check the stator to make sure it's good, check the plug wires.... keep looking. Quote Link to comment Share on other sites More sharing options...
tarmacsti Posted May 9, 2012 Report Share Posted May 9, 2012 I have the exact same thing.... I thought it might be the timing, that was set to +4 to which I set back to 0 now. But I havent rode the bike to see if it makes a difference.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.