xander450 Posted April 19, 2012 Report Share Posted April 19, 2012 Just like the title says - looking for a (working!) stock CDI and stator of the early round-plug variety. Thanks! Quote Link to comment Share on other sites More sharing options...
xander450 Posted April 19, 2012 Author Report Share Posted April 19, 2012 I could also use a set of good cases (and internals - nuts and bolts, all the misc bits) with no chain whack, stripped threads, etc. Please PM me if you've got what I need. Quote Link to comment Share on other sites More sharing options...
quadpro26 Posted April 21, 2012 Report Share Posted April 21, 2012 i have some cases and stuff. what internals do you need? Quote Link to comment Share on other sites More sharing options...
quadpro26 Posted April 21, 2012 Report Share Posted April 21, 2012 also have a complete 2001 ignition for $250 stock stator flywheel harness coil on/off switch key cdi regulator Quote Link to comment Share on other sites More sharing options...
xander450 Posted April 24, 2012 Author Report Share Posted April 24, 2012 Thanks, but would rather not deal with switching over to newer electrics, so want to get the early style CDI and stator. Coil too, if someone's got it. Not sure which is the issue, so may as well buy all of them and have spares. Quote Link to comment Share on other sites More sharing options...
xander450 Posted April 25, 2012 Author Report Share Posted April 25, 2012 Bump, still looking. Pre-95 is best, but at this point I'll take the newer style and re-wire if that's what you've got. Quote Link to comment Share on other sites More sharing options...
Dahl87banshee Posted April 28, 2012 Report Share Posted April 28, 2012 I have an 87-94 cdi. Don't have the stator though.. Offer on it.. Or I would trade for a 95-06 cdi Quote Link to comment Share on other sites More sharing options...
xander450 Posted May 5, 2012 Author Report Share Posted May 5, 2012 Bump... missed quadpro's sale, still need complete electrical system (with harness if 95+, without if 87-94). Quote Link to comment Share on other sites More sharing options...
hp2000 Posted May 6, 2012 Report Share Posted May 6, 2012 I have a complete un molested 89 harness,key,swich,cdi,stator,regulater.. Quote Link to comment Share on other sites More sharing options...
03DMshee Posted May 7, 2012 Report Share Posted May 7, 2012 i used a newer CDI on my older banshee...i just used a terminal tool...popped terminals out of one of the plugs and put the older end on newer box...1 plug is the same and the other is a little differant...been running it for a while with no issues....no cuts at all...looks just like a factory plug end Quote Link to comment Share on other sites More sharing options...
David DeLeon Posted May 8, 2012 Report Share Posted May 8, 2012 I have both the CDI and stater. Send me an email deleontow@msn.com Thanks David Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.