WTB stock CDI and stator for 87-94 banshee

[xander450]

Just like the title says - looking for a (working!) stock CDI and stator of the early round-plug variety.

 

Thanks!

[xander450]

I could also use a set of good cases (and internals - nuts and bolts, all the misc bits) with no chain whack, stripped threads, etc.

 

Please PM me if you've got what I need.

[quadpro26]

i have some cases and stuff. what internals do you need?

[quadpro26]

also have a complete 2001 ignition for $250

 

stock stator

flywheel

harness

coil

on/off switch

key

cdi

regulator

[xander450]

Thanks, but would rather not deal with switching over to newer electrics, so want to get the early style CDI and stator. Coil too, if someone's got it. Not sure which is the issue, so may as well buy all of them and have spares.

[xander450]

Bump, still looking. Pre-95 is best, but at this point I'll take the newer style and re-wire if that's what you've got.

[Dahl87banshee]

I have an 87-94 cdi. Don't have the stator though.. Offer on it.. Or I would trade for a 95-06 cdi

[xander450]

Bump... missed quadpro's sale, still need complete electrical system (with harness if 95+, without if 87-94).

[hp2000]

I have a complete un molested 89 harness,key,swich,cdi,stator,regulater..

[03DMshee]

i used a newer CDI on my older banshee...i just used a terminal tool...popped terminals out of one of the plugs and put the older end on newer box...1 plug is the same and the other is a little differant...been running it for a while with no issues....no cuts at all...looks just like a factory plug end

[David DeLeon]

I have both the CDI and stater. Send me an email [email protected]

 

Thanks

David