do-work-son Posted March 27, 2012 Report Share Posted March 27, 2012 I can't get my carbs sync with the air gauge . I do it by sight and get em really close at idle and the air gauge reads 5 on one and 7 on the other play with it a little or even just hit the gas and it will switch get 7 on the one I had 5 and 5 on the one I had 7 and it is running out like I let off the throttle and it take a while to calm down ? I hold the throttle at 1/2 open and the gauge will read 15 on one side and 10 on the other I'm lost .. I switched plug wire on the cylinder and didn't help or change the gauge reading Quote Link to comment Share on other sites More sharing options...
Overboost Posted March 27, 2012 Report Share Posted March 27, 2012 you change part throttle sync with the screws on top of the carbs, or cable inlets, tighten to lessen pull, loosen to increase vacuum Quote Link to comment Share on other sites More sharing options...
do-work-son Posted March 27, 2012 Author Report Share Posted March 27, 2012 Yeah I know how to sync them but I can't get wm synced there always off and if I get it close with eye sight the gauge reading is off then try and adjust with gauge and I can't get up close Quote Link to comment Share on other sites More sharing options...
slothman Posted March 27, 2012 Report Share Posted March 27, 2012 maybe this will help: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.