bluedemon Posted March 9, 2012 Report Share Posted March 9, 2012 Sup guys, I'm new to 2 strokes and have a few ?s. I recently bought an 05 banshee, for what I can see it only has a k&n filter and cdi pipes. What ratio should I use on my fuel? And what's a good brand for the oil? Thanks Vic.. Quote Link to comment Share on other sites More sharing options...
Boston Posted March 9, 2012 Report Share Posted March 9, 2012 cpi? um i run all mine at 40-1 with klotz. never had a problem with that ratio Quote Link to comment Share on other sites More sharing options...
cline Posted March 9, 2012 Report Share Posted March 9, 2012 Same here. 40:1 with Klotz. I used to use motul 800 but found it hard to come by where I live so I switched to Klotz. Quote Link to comment Share on other sites More sharing options...
bluedemon Posted March 9, 2012 Author Report Share Posted March 9, 2012 Thanks guys, do they sell this brand at any auto part store? Quote Link to comment Share on other sites More sharing options...
GrayRaptor734r Posted March 9, 2012 Report Share Posted March 9, 2012 I dont think Ive ever seen Klotz at an auto parts store......you'll probably have to order it or go to a stealership Quote Link to comment Share on other sites More sharing options...
cline Posted March 9, 2012 Report Share Posted March 9, 2012 Thanks guys, do they sell this brand at any auto part store? I personally have never seen Klotz or any banshee stuff at an auto parts store such as Napa or Autozone. I have always purchased my 2 stroke oil from any of the local off road shops / Atv shops where I live or off rockymountainatv.com I am however a newer member to bansheehq so you may want to check the bansheehq site sponsor list to see if any of them offer it at a better price because I haven't had to purchase any since becoming a member so I don't know. Quote Link to comment Share on other sites More sharing options...
bluedemon Posted March 9, 2012 Author Report Share Posted March 9, 2012 Ok cool, there's a Polaris store near by, ill give them a call... I'm planning on doing a port and coolheads later on, should I stick to that ratio or go a little richer? Quote Link to comment Share on other sites More sharing options...
toytech Posted March 9, 2012 Report Share Posted March 9, 2012 amsoil dominator oil at 40 to 1 great oil, easy to find Quote Link to comment Share on other sites More sharing options...
dcalsv02 Posted March 9, 2012 Report Share Posted March 9, 2012 Stick to your same ratio. Only thing you would have to change is the fuel octane, but that depends on how what domes you use. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.