JdmNinja Posted February 4, 2012 Report Posted February 4, 2012 I need some adjusting help plz, I have an 05 banshee and I just installed a Tors removal Kit. maybe i missed something here but every time i start it ,it wont stay idle. Quote
NetBSD Posted February 4, 2012 Report Posted February 4, 2012 did you install the idle screws and adjust them? to install the screws you need to drill and tap the carbs. to adjust just keep turning the idle screw in untill it idles smoothly, do the same for other cab and check sync Quote
Broke_Banshee Posted February 4, 2012 Report Posted February 4, 2012 choke tube between the carbs on????? Quote
sprinklerman Posted February 4, 2012 Report Posted February 4, 2012 IF you installed the screws and they are screwed in all hte way, you probably need to grind more of the shoulder off that you tapped. That seems to be the most common mistake. Hope that helps. Quote
JdmNinja Posted February 5, 2012 Author Report Posted February 5, 2012 I think the problem was that I forgot to unplug the tors main brain box. now my shee stays on . but now with both idle screws all the way in isnt my shee supposed to be at very high idle?? its sounds normal . so should i grind off a bit more ? Quote
muggzy Posted February 5, 2012 Report Posted February 5, 2012 I think the problem was that I forgot to unplug the tors main brain box. now my shee stays on . but now with both idle screws all the way in isnt my shee supposed to be at very high idle?? its sounds normal . so should i grind off a bit more ? Yeah, take another 2mm from each carb body. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.