lights

[350 screamer]

im doing different lights, im stumped here iknow that green is high beam, but wat goes to wat

 

black wire and white wire on the light side

 

green,black,yellow on the connection on the banshee ?

 

picture on the craigslist URL................ lol quickest thing i thought of to post a pic, file was to big on here

 

http://worcester.craigslist.org/rvs/2818173849.html

Edited January 25, 2012 by 350 screamer

[Larry's Shee]

Black is ground. Can use either or both to the white.

[350 screamer]

Black is ground. Can use either or both to the white.

 

 

so black and green go to black, wata bout 1 left on each side? cutem off? orrrr?

[Larry's Shee]

Sorry, by both I ment yellow or green to white.

[bansheesandrider]

so black and green go to black, wata bout 1 left on each side? cutem off? orrrr?

I would hook up BOTH the green and the yellolw to the white wire on the lights. That way it won't matter if you have the switch on high or low beam.

[sheerider11]

I hooked up just the low, this way I can either push the switch to the middle or pull it from the high beam which is now another off position.