chetgoff Posted January 16, 2012 Report Posted January 16, 2012 Hey guy's i'm installing a new driveline clutch and have a few questions. 1. do I still use the rubber under the fibers? 2. with the steels not having the tab like stocks how do you tighten the clutch spring bolts. it just spins . am I not doing something right. Quote
Phelps Posted January 16, 2012 Report Posted January 16, 2012 no rubbers and i am lost on your second question.... stick a screwdriver between the basket gear and drive gear. Quote
BANSHEE HP Posted January 16, 2012 Report Posted January 16, 2012 id use a shop rag of some kind to stop the gears over a screw driver. Quote
chetgoff Posted January 16, 2012 Author Report Posted January 16, 2012 I tried it with no rubbes and it seemed to have a little play with the fibers and steels. But I have only installed stock ones. I had a brain fart with the second question I did not put the bike in gear. so the pressure plate was just spinning. I will take the rubbers out ane re install. thanks for the help guy's Quote
Phelps Posted January 16, 2012 Report Posted January 16, 2012 id use a shop rag of some kind to stop the gears over a screw driver. like you have never used one.... besides you are not gonna hurt gears applying 5ftlbs at most to the bolts Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.