Jump to content

winter jetting


bansman76

Recommended Posts

hey guys. just needing some opions on winter jetting. here is my mods -

 

pro circuit pipes and silencers

+4 timing

.30 over wiseco pistons stock porting

new stock stroke crank

stock reeds

stock head

toomey 2 into 1 air filter (no airbox at all)

current jetting is stock pilots, middle clip on needle, 300 mains

runs good now but wanting to be safe for winter. all opions appreciated .thanks

925 ft elevation at my house.

up to 3500 feet in elevation where i usually ride .

Link to comment
Share on other sites

Probably have to go up 2-3 sizes on the main IF you were jetted perfect before.

You need to jet where you ride, a few thousand feet from your house is quite a difference in jetting.

It might be crisp at your house but blubbery where you ride, or worse...crisp where you ride but lean at your house.

 

You might have to richen up the air screw 1/4 to 3/4 turn, if it starts and idles poorly even after warmed up and off the chokes...richen it up by turning each air screw in 1/4 turn until it clears up and runs strong.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...