Infamous039 Posted December 9, 2011 Report Posted December 9, 2011 I am in the process of building a 4mm Serval motor on 93 pump fuel. I currently have a TUSK clutch kit in my stock stroke-dune ported motor that is holding up well with no slippage problems. My question is will a TUSK clutch kit with HD springs be able to hold up to a 4mm Serval motor ??? Quote
Rootracing Posted December 9, 2011 Report Posted December 9, 2011 Buy a driveline clutch with drag springs...Great clutch Quote
Infamous039 Posted December 9, 2011 Author Report Posted December 9, 2011 Yea I had a driveline in my old 4mm motor that was great, but I was thinking about reusing the current TUSK clutch I have but wanna make sure it can hold up to the Serval Cub motor. Quote
tz racin Posted December 12, 2011 Report Posted December 12, 2011 hey trav driveline is very good clutch! and also u can use a barnett severe duty with heavy duty springs springs should work good all I have ever uses aside from oem is barnett and no issues and I I have 2 seasons on my barnett severe duty clutch kit on alky runnin 4.0 but driveline oem and rdz are 3 that I know are good bud Quote
Infamous039 Posted December 12, 2011 Author Report Posted December 12, 2011 Thanks, TZ. I actually have a brand new Tusk Clutch Kit with HD springs that I got for $40, so I am going to thro that in the bike for now. If the clutches get toasted within the year I will grab a new one then. I figured since I had the Tusk kit already I might as well use it. hey trav driveline is very good clutch! and also u can use a barnett severe duty with heavy duty springs springs should work good all I have ever uses aside from oem is barnett and no issues and I I have 2 seasons on my barnett severe duty clutch kit on alky runnin 4.0 but driveline oem and rdz are 3 that I know are good bud Quote
spurdy Posted December 12, 2011 Report Posted December 12, 2011 Thanks, TZ. I actually have a brand new Tusk Clutch Kit with HD springs that I got for $40, so I am going to thro that in the bike for now. If the clutches get toasted within the year I will grab a new one then. I figured since I had the Tusk kit already I might as well use it. I've got a TUSK in my 4 mil stock cylinder. I raced a season with it on alky and it held up just fine. Dropped back down to 110 octane for next year. Haven't had any issues as long as I run heavy springs. Oh, it's under a DD lock up too. SP Quote
bansheeboie Posted January 5, 2012 Report Posted January 5, 2012 F.A.S.T clutch from jeff. Great product Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.