case repair

[gomerkfx700]

well guys im goin threw all my banshee parts for my build and i was inspecting the cases witch are powder coated a not very nice blue i dont like it at all but i took the cylinder studs out of the cases to notice that one stud had been coss threaded in and the threads were messed up bad and another was almost stripped you can screw it down all the way and wiggle it back and forth also it looks like someone has heated the alum behind one of the studs so hot it almost melted the alum. are there anywere that you guys know of that can cheek fix these threads or would i be better off just buying a set of cases im leaning towards just buying a set but thought id ask first.

[rocky_mtn_yamaha]

You could heli-coil the threads, but if you have the money for cases and its already apart, why not?

[Coupelx]

if its been heated to the point the Aluminum melted. chances are its not gonna hold up to a repair.

[gomerkfx700]

that is what i was thinking also. ive bidded on a set on ebay guess ill put these in the scrap pile well at least the top case the bottom is good shape if anyone is in need of one.

[gomerkfx700]

i may have screwed up i bidded on a set of cases that had been bored for cheeta cylinders ans port matched ops. u guys think they will work ok with a 4 mil stock cylinder build.