gearing

[carter]

I Just bought a banshee and Need a lol help please.. it is dune ported with shaved head v force reeds shaved gears with shift star mod, shaved fly wheel, hot rod crank, with cpi pipes, stock carbs.. i run 22x10x8 10 paddle haulers.. now my question is gearing. It pull hard on lancha and all the way through 3rd when i hit 4th it seems like it Just dont pull that hard like 1st thru 3rd.. i still have stock gears 14t 41tt.. Any info would be appreciated

[wacko2000]

Welcome to the site!!!

Are you running a stock length swingarm?

What jets are you currently running?

You could possibly be over paddled or your jetting could be off

 

Post some more info and the guys here will get it worked out for you!!

Joe

[locogato11283]

I'd say you're over paddled.

[carter]

Its a 6+ swingarm and not for sure on jetting everything was done to it when i got it.. it rips hard as hell till 4 th gear..it still runs good but it dont pull as hard as the first 3

[carter]

It kinda feels like the gearing to me.. didnt know if i got a smaller sprocket if it would help.. figured the 22's have my gearing off-line some

[locogato11283]

On the big end it's just not wanting to turn those big paddles. You can compensate some by dropping the gearing. Otherwise, you may need to look into another paddle setup. Sand, gearing and paddles is kind of like a big puzzle. Sometimes it takes a while to put all the pieces together for optimal performance.

[carter]

Wat do Yall think would be the best tire for my setup

[06specialedition]

It would probably make a good difference trying some 20-21 inch 8 paddle haulers.