SuperMex Posted November 3, 2011 Report Posted November 3, 2011 Here is the deal I have a small air leak after doing a leak down on the outside edges of the cylinders. I want to pull them and add a lil sealer to the base gasket. I am trying to get these damn cylinders off without prying on the edges and fucking them up. They are stuck on there good any ideas on how you guys get them loose, this is my first cub and stockers come loose pretty easy. I am thinking some wood and pry under the intakes and exhaust ports? Just don't want to fuck anything up. Thanks Quote
guns4children Posted November 4, 2011 Report Posted November 4, 2011 I'm having the opposite problem. Try as I might I can't get the damn cylinders on. Quote
SAVAGE420 Posted November 4, 2011 Report Posted November 4, 2011 Wack it off hard with a rubber mallet like you do in the lil boys room. Quote
Jereme6655 Posted November 4, 2011 Report Posted November 4, 2011 how about rotating the motor over with the kickstarter nice and easy.....while your giving it some love with a rubber mallet.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.