BIGDADDYBANSHEE Posted October 7, 2011 Report Posted October 7, 2011 I AM LOOKING FOR A WAY TO MOD MY FACTORY AIR CLEANER LID FOR MORE AIR FLOW ! ANY SUGGESTIONS ? I HAVE A K&N AIR FILTER IN IT ALREADY BUT NEED MORE AIR FLOW FOR THE BIKE IT HAS BEEN PIPED AND JETTED ! Quote
VoOK Posted October 7, 2011 Report Posted October 7, 2011 you cut a large hole out of the top, fab up a seal to hold down a piece of outerware and put another piece of outerware around the snorkel. I post a pic when i get a chance. Quote
VoOK Posted October 7, 2011 Report Posted October 7, 2011 (edited) poor mans version of this (not trying to say anything about ones lifestyle) Edited October 7, 2011 by VoOK Quote
wfobasheeboy Posted October 7, 2011 Report Posted October 7, 2011 Ditch the whole box & lid and go to pods! Quote
Jereme6655 Posted October 8, 2011 Report Posted October 8, 2011 just remember you need to jet it again if you mod the airbox to allow more airflow. If you want more but still want protection against the elements then give FAST a call....it'll prob be nick that will help you....tell him you want to mod your airbox for more airflow and he will get you a package of plastic circles that have foam in the middle of them.....all you do is drill the required size hold in your air box (above your filter!!!) and then pop the plastic circle in and it allows air to flow through that spot while still being filtered.... Quote
BigRed350x Posted October 9, 2011 Report Posted October 9, 2011 PM sent... I've got a K&N filter adaptor plate that bolts to the factory air box, k&n filter and outerwear I'll sell ya. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.