spalding Posted October 2, 2011 Report Posted October 2, 2011 hey guys i have a set of pro circuits i plan on installing and want to know what to rejet it it is stock except for pro design air filter and elevation is 350ft Quote
volcrano Posted October 3, 2011 Report Posted October 3, 2011 lid or no?with no lid 27.5 pilots and 290-300 because of ur elevation.with lid 280 and adjust air screws,stock pilot might be ok for lid.ull be in the ballpark. Quote
spalding Posted October 3, 2011 Author Report Posted October 3, 2011 lid or no?with no lid 27.5 pilots and 290-300 because of ur elevation.with lid 280 and adjust air screws,stock pilot might be ok for lid.ull be in the ballpark. yes i'm running with lid Quote
spalding Posted October 4, 2011 Author Report Posted October 4, 2011 does anyone have anything else to say and also where can i get some jets and what do you mean by adjust air screws Quote
shee bang shee bang Posted October 5, 2011 Report Posted October 5, 2011 when jetting your air screws have to be re adjusted also they are on the left side of each carb...most people turn them all the way in until they barely bottum out and then turn them out 1.5 turns out...thats what i run Quote
spalding Posted October 7, 2011 Author Report Posted October 7, 2011 well my elevation 408 just found out will it change anything Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.