biggun6ss Posted July 19, 2011 Report Share Posted July 19, 2011 I currently have the billit intakes but the rubber section that connects to the carb is starting to crack. Is there anyone that sells just that piece or do you have to buy the whole billit piece? Quote Link to comment Share on other sites More sharing options...
Phelps Posted July 19, 2011 Report Share Posted July 19, 2011 I currently have the billit intakes but the rubber section that connects to the carb is starting to crack. Is there anyone that sells just that piece or do you have to buy the whole billit piece? yeah andy at M&MATV or just about any of the other engine sponsors can get you new boots. you will need the numbers off of it, or the bolt spread when you call them. Quote Link to comment Share on other sites More sharing options...
biggun6ss Posted July 22, 2011 Author Report Share Posted July 22, 2011 The intake is a BOSS. I measured the bolt holes to be 2 3/8 apart center to center. Does this sound about right? Quote Link to comment Share on other sites More sharing options...
toytech Posted July 23, 2011 Report Share Posted July 23, 2011 make sure you get mikuni boots, not cheap ones Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.