Jump to content

Recommended Posts

Posted

Total weekend was ruined I live in ohio but ride in kentucky elevation 840ft I didn't think about it so my jetting was terrible need help not sure really how to set it up so it will run better I was overheating an bogging a lot in 1st an 2nd my set up is a 404big bore with hemi head2 21cc domes vforce3 reeds trinity 2into1 kienhin 35mm carb fmf pipes amr stage3 cdi with a lil bigger stator k&n air filter no box my jetting is 2 up on the needle 58pilot an a 190main running castor927 40-1 107 octane half an 93 for the other half air screw two turns out please need some help don't wanna have to ride another slow ass farm quad thanks

Posted

Yousirwinthelongestsentenceawardcollectprizeoverthere>

Posted

i would think you would need a 42-45 pilot,195 maain,eek 4th from top on the needle,your jetting is close if your overheating its time to look at other issues like airleak ,headgasket shit like that.I would pressure test the motor to see if its tight

Posted

After you're here for a while you'll see who is funny, who is knowledgeable, sarcastic, and an asshole. Savage is 3 for 4 :rotflmao: . Check your impellor/drive gear, plastic only lasts just so long. :cheers:

 

 

 

 

Bythewaylongassrunonsentencesreallydosuck,makesithardtofollow. :jesterlaugh: Bewareofthegrammerpolice. :jesterlaugh:

Posted

Yea I got a billet impeller an a oversized rad. It also has a new head gasket I jus got it together before I went on the trip. I had it runnin good in ohio but when I got to kentucky it wasn't so good.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...