best place to get pistonkits

[yamahaman244]

Hey guys my left side is getting down alittle more then right and I have way over 200 hrs on my motor sence I've bought it last year...so. i m gunna re do the top end.. it had wiscos in it right now

 

I'm looking for a place to buy a kit gaskets and everthing...I thought one of the sponcers had them for like 180 bucks for everything another qustion do u think I could just rering it..when I put reeeds in it a week ago pistons looked good from the intake side.and walls look good to

[06specialedition]

If your going to do it, do it right. I wouldn't mess around just re-ringing it. Whats your compression?

 

Wildcard has everything you need and has great prices.

[yamahaman244]

Well right side is around 135 and left tonight was pretty low I just quite kicking if I take the right plug out and leave the left in its like both are out not much there

[Zwiser]

if its under 110 psi its time for a rebuild, id just do pistons and all, so then you can ride for another 200hrs and not have a problem.

 

make sure you correctly break it in afterwards.

[Burt Reynolds]

I have never found cheaper than ebay. Especialy if you run wsm wich i do.

[Larry's Shee]

It's a calculated risk. If piston to cyl clearance is well within tollerance and taper/out of round, you could get away with just rings. But depending on tollerances you probably won't get 200 hours more on just rings. Be sure to use new piston pin cir-clips.

 

I had to tear my son's down after he filled the motor with muddy water and just put rings in it.

 

This is why you don't want to down your bud with the blown 450.