bansheecaptain Posted May 17, 2011 Report Share Posted May 17, 2011 so here is my problem i go and ride my banshee just rebuilt and when it hits powerband after a few seconds both side shut off like the kill switch was hit and one side kinda purges and when i let off the gas for a couple seconds its good to nail it again for a second or two . plugs are good color , i got the floats messured the same tried changing around plug leads still same side , not lossing tanny oil , did pressure/leak test everything is fine , reeds are brand new Quote Link to comment Share on other sites More sharing options...
J-Madd Posted May 17, 2011 Report Share Posted May 17, 2011 Sounds lean to me. Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted May 17, 2011 Report Share Posted May 17, 2011 Check tank vent and petcock. Quote Link to comment Share on other sites More sharing options...
bansheecaptain Posted May 18, 2011 Author Report Share Posted May 18, 2011 could the vent be pluged or something in side , im running 160 main 45 pilot and 3rd clip on kehin 28s Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted May 18, 2011 Report Share Posted May 18, 2011 could the vent be pluged or something in side , im running 160 main 45 pilot and 3rd clip on kehin 28s whats your compression at.What fuel you runnin? Quote Link to comment Share on other sites More sharing options...
bansheecaptain Posted May 18, 2011 Author Report Share Posted May 18, 2011 fuel 94octane , compression 150 Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted May 18, 2011 Report Share Posted May 18, 2011 if this is with the 2-1 you should be 190-195 main,42-45 pilot,i think ann eej if i remember correct,if its a 2-1 richen it up or its gonna fry Quote Link to comment Share on other sites More sharing options...
bansheecaptain Posted May 19, 2011 Author Report Share Posted May 19, 2011 no i havent updated my sig i did a build this winter i have dune/trail port running dual 28's Quote Link to comment Share on other sites More sharing options...
rappy660 Posted May 19, 2011 Report Share Posted May 19, 2011 There is plenty big jets. The problem is the little tab on the back if your floats isn't letting them drop allowing the needle to unseat to allow gas flow. I guarentee this is the problem Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.