Zwiser Posted May 9, 2011 Author Report Posted May 9, 2011 i got it today, comp was 120 in both cylinders, it has a kn airfilter and a boost bottle, also i noticed there was oil on the engine skid plate and i located the area where its coming for its a little raised circle hole by the drain bolt, is there soppused to be a bolt in there? Quote
Yamahabansheebros Posted May 9, 2011 Report Posted May 9, 2011 if i saw a boost bottle on a bike that i would gtfo of there.. Quote
gotta_goatsfast Posted May 10, 2011 Report Posted May 10, 2011 They can tear your intake boots. This allows unmetered air past the carburetors. This results in a usually fatal lean condition. And if you eat salads for a month you'll gain more speed than what a boost bottle would ever offer. Quote
Zwiser Posted May 10, 2011 Author Report Posted May 10, 2011 ok well i plan on redoing this thing all correct and i have a few questions about this shee should i post them in here or in a different thread? Quote
Larry's Shee Posted May 10, 2011 Report Posted May 10, 2011 Well by the looks of the Blaster you have a severe case of the Modification Bug. Almost think the other guy got the better deal , JK. Replace A-arm bushings, run the works shocks unless you trade, and get to work!! Get rid of the boost bottle! I thought intake boots tearing was a myth till I was putting my son"s back together and looked at them closely, and sure enough they were cracking !! I used some plugs from the hardware store with three bond and clamps, no balance tube. Quote
bluebanshee421 Posted May 14, 2011 Report Posted May 14, 2011 Hey welocome to bhq and all i gotta say is be careful im not sayin you cant ride but there are people who have ridin big four-strokes and think they can handle a shee but its a whole different animal especially when it hits the powerband its not for the faint hearted. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.