JETTING HELP!

[kamp0ss]

So currently my banshee has:

 

-Pro Circuit pipes and Silencers

-V-force3 Reeds and Cages

-Pro Designs Air Filter

-Holes in Airfilter Box (with little filters)

-TORS removal kit

 

I bought it this way and have no idea what it has for jetting. I am guessing it is what came with the pipes but not sure.

 

I am getting this weekend:

 

- +4 Timing Plate

- K&N Air Filter

 

Can someone tell me what I need for jetting and where a cheap place is too buy it? And possibly a how to website as well on installation.

 

After I put these new mods in, I need to rejet, but do I also have to re-sync or anything else?

 

 

THANKS

 

P.S. I ride with the air filter cover on, and have the little holes cut into the box with the mini filters. My temp is between 60 and 100.

[banshee_R1]

whats your altitude

[kamp0ss]

whats your altitude

 

 

200-600ft above

[FullThrottle_06']

Get yourself a Clymers Manual if your lost on how to tear down your carbs. It isn't as bad as you think. If your re-jetting your going to have to re-sync your carbs everytime you take them out to exchange mains and pilots. Your going to need to find out where your at now, that way you know where you need to go. Or atleast where you think your going lol

[banshee_R1]

you should find out whats in them, but i would try a 290 main 27.5 pilot start at the mixture screw at 1.5 out

[kamp0ss]

i will take the carbs apart after work today, i know how to take them apart but how do i know what i have already? are their numbers on them?

[kamp0ss]

you should find out whats in them, but i would try a 290 main 27.5 pilot start at the mixture screw at 1.5 out

 

I have:

 

200 Main Jet

25 Pilot jet

Y151 Needle on the bottom clip