setting up a set of 38mm mikuni's for alky

[jrmarquez.702]

hey guys, i have a set of 38mm mikuni tm's and im trying to get them set up for alky. I would like to try these out, just need a little help.

Im gunna try them out on a 4mil cub. here is what i need help on

-main jet?

-pilot jet?

-needle?

-needle and seat?

Ive always used pwk's so im pretty lost rite now, so any advise would be great.

thanks...

also, rite now they have a 40 pilots, 6dp4 needles and both carbs only have one float.

[shanYE west]

dont forget your gonna need a powerjet kit.

[smithers1986]

run u some lectrons man i love mine

[sleeper06]

you need to find mikuni people ,most around here run pwks,I just converted to alky on two bikes but with 39pwks,there is a lil involved to ensure fuel flow like drilling the carb body out,pilot circiut

[jrmarquez.702]

Yea, not too much mikuni love on this site...lol... I already have alky 40mm pwk's on bike, I just wanted to try something different.

Hopefully someone that runs mikuni's can help me out....

[yamahaD4L]

Ive got some 35 TMs on alky. First timer on alky. Bought them as they sit other than putting a different power jet on it. Not sure about the needles or pilot cause when I dynoed it I didnt need to mess. The main I drilled out to 116 thousandths. Im running stock bore 4mill stroker. Can check and repost later. Only got 4 passes before I smoked it Sat at Silver Lake. My own fault forgot to top my tank off ran lean and most know that melt down sound. Will get bavk to you once I get back and tear them apart. Be a good reference I guess.