superbanshee03 Posted April 21, 2011 Report Share Posted April 21, 2011 So I bought a new clutch thinking my old one was shot since the adjustment was all the way out on the handle. I then noticed the old one was in good shape. So got wondering what was going on. Grabed the clutch basket and was able to move the whole basket and shaft up and down. So im thinking maybe the bearing behind the clutch basket is out. My question is do yall think this is my problem and how hard is that to change out. Also should I go ahead and replace the other bearings in the bottom end since im going to have to split the case anyway? Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted April 21, 2011 Report Share Posted April 21, 2011 Sounds like you definitely have something out of whack in there. I would split the cases and go ahead and replace all the transmission bearings. They are all pretty cheap and worth it to replace when you go to all the trouble of splitting the cases. - Jared Quote Link to comment Share on other sites More sharing options...
superbanshee03 Posted April 21, 2011 Author Report Share Posted April 21, 2011 Where would be a good place to purchase them? Quote Link to comment Share on other sites More sharing options...
superbanshee03 Posted April 21, 2011 Author Report Share Posted April 21, 2011 (edited) Does it come in a kit? Edited April 21, 2011 by superbanshee03 Quote Link to comment Share on other sites More sharing options...
Jereme6655 Posted April 22, 2011 Report Share Posted April 22, 2011 you should be able to get the bearings through any of the site sponsors on the bhq.......we like to support them as they have done THOUSANDS of hours of research and development to help bring up the best products and the greatest power from our bikes... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.