MorrisJL Posted April 4, 2011 Report Posted April 4, 2011 I The other day I noticed my coolant res was empty so I put some coolant in it, checked my radiator to make sure it was good and full...no big deal. While taking brake on the trail I noticed my coolant hose was draining some coolant into my skid-plate, so I check my res and it was empty again... I don't under stand why I can't keep coolant in there. My radiator is always full, and there are no signs of the engine temp being high, or an evaporation leak from any hose or the cap...I plan to take a look in the trouble shooting chapter of my clymers manual, but don't remember seeing this issue in there...Has anyone else had this problem... any suggestions? Quote
camatv Posted April 5, 2011 Report Posted April 5, 2011 make sure the hoses are routed right THEN fill it to the middle of the HIGH /LOW marks and leave it alone.. Quote
Larry's Shee Posted April 5, 2011 Report Posted April 5, 2011 Inspect the bottle might have developed a crack or have a thin spot worn into it. Quote
06specialedition Posted April 5, 2011 Report Posted April 5, 2011 I filled mine last year and i swear it hasn't moved since then. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.